1. The valve pocket packaging machine USES the motor as the power source to drive the impeller in the discharge seat to rotate smoothly to achieve uniform feeding;
2. The sensor measures the material weight in the bag and inputted the measurement signal to the microcomputer. When the filling weight is reached, the microcomputer outputs the signal.
3. At the same time, the electromagnet rod moves up and the material bag falls down, so as to realize quantitative and rapid packaging of loose materials;
4. The material enters into the lattice wheel from the outer material bin, enters into the ash hopper from the feed port on the machine stand, delivers the material evenly to the discharge port through the steady rotation of the impeller, inserts the packaging bag, touches the travel switch on the right side of the feed nozzle, and the sealing cylinder contracts;
5. The discharge nozzle is unobstructed, the filling starts, and the material falls into the bag smoothly;
6. With the increase of materials in the bag, the signal input by the sensor into the microcomputer is constantly changing. When the material weight reaches the set requirements, the microcomputer outputs the signal, the sealing cylinder is extended to seal the outlet, and the electromagnet lever is moved up, the material bag falls down, so as to meet the automatic packaging requirements of automatic metering and automatic bag dropping.
